TPS Gauge
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
TPS Gauge
I don't know if this is normal or not, but it seems that the TPS gauge in Megatune is a percentage of 5V, regardless of what the max and min TPS voltages are configured as. For example, my TPS ranges from .67 volts closed to 4.09v wide open. I configured these adc (around 136 and 833) values as the closed and open values, and when I move the throttle and look at the gauge, closed throttle shows about 12%, and full throttle is about 82%, rather than 0 and 100%. Anyone else have this problem? My temp and MAP gauges seem to be working properly. The only other input that is giving me trouble is the crank sensor (a VR), it's not registering any engine speed whatsoever, but I don't think that's related to Megatune.
Re: TPS Gauge
Update:
So, I switched to the latest code version, megasquirt II ini and restarted megatune, saving a default values file under the new code, and my TPS gauge is working in the full range, so that's a good sign. Now, Ill try some things and see if VR sensor starts working.
So, I switched to the latest code version, megasquirt II ini and restarted megatune, saving a default values file under the new code, and my TPS gauge is working in the full range, so that's a good sign. Now, Ill try some things and see if VR sensor starts working.