The MegaSquirt Project has experienced explosive growth other the years, with hundreds of new MS installations occurring every week - a phenomenal success! MegaSquirt has been successfully used in all aspects of Internal Combustion engine applications including R&D, Industry, Race, and Research. The MS project has transformed itself from a simple R&D project into a full-featured mature engine control system. To reflect this the support structure has also changed to meet the needs of MegaSquirt Users.
Moving forward, the R&D forums for MegaSquirt project are in a read-only mode - no new forum posts are accepted.
However the forums will remain available for view, they still contain a wealth of information on how MegaSquirt works, how it is installed and used. Feel free to search the forums for information, facts, and overview.While the R&D forum traffic has slowed in recent years, this is not at all a reflection of Megasquirt users, which continue to grow year after year. What has changed is that the method of MegaSquirt support today has rapidly moved to Facebook, this is where the vast majority of interaction is happening now. For those not on Facebook the msextra forums is another place for product support. Finally, for product selection assistance, all of the MegaSquirt vendors are there to help you select a system, along with all of the required pieces to make it complete.
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
This car was previously running correctly for many months. Now, it will not restart when warm. It also occasionally dies at idle and can be rstarted if cold, but not if warm. An IAC (idle valve) problem or a tps problem has been suggested, but I have some datalogs, and was wondering if anybody could help me narrow down or possibly repair this problem. One note of interest is that the duty cycle gauge is at 8 billion percent and is glowing red on the megatune display. The car has coil packs from a ford explorer, and was tuned by ryanpzz. All sensors feed into megasquirt, there is no OBD system left. Thanks in advance for the help.
One thing to look at when this happens is the hot cranking pulse width. Often people have this a bit too long from tuning in mild weather, then a hot shut down makes it imposiible to restart.
So you might look at is lowering your hot cranking pulse width by about 5% or even 10%.
I have megatune 2.25b. In the settings tab under enrichments, is the hot cranking pulse width the cranking pulse at 170*F? If so, this is set at .1. Should i change it to .09?
A point of interest: When I open megatune, it says that the controller code version does not match signature in Megasquirt-I.ini.
Expected "0x14" (found in ini file)
Received '''' (from controller)
Table corruption may occur, this is usually a very serious problem.
Terminate megatune now?
I am currently getting the code form the previous owner via email, should that solve the problem?
Is using megatune after this message shows going to result in damage? I think that the problem stated by this message is preventing me from accessing my settings. I would like to first make sure that I can adjust settings with no damage before really attempting it. Again, any help is greatly appreciated, I really need this car repaired ASAP.