number of squirt

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
krisr
Helpful Squirter
Posts: 137
Joined: Wed Aug 17, 2005 12:17 am
Location: Sydney, Australia

Post by krisr »

Sounds like req_fuel constant is to low. You used the required fuel calculator yeah?

The manual has the recommended req_fuel settings to get it to idle right. You may have to play with fuel pressure if that fails..
Sydney, Australia
Successfully MS2 v3.0 squirted 1971 Holden Monaro HQ
400 Pontiac, ported #16 heads, Tomahawk intake with custom plenum using LS1 78mm throttle body dialed in with a TechEdge 2E0 Wideband Controller.
Top
fiat132
MegaSquirt Newbie
Posts: 28
Joined: Tue Sep 20, 2005 12:22 pm
Location: EGYPT

Post by fiat132 »

on my constants page i have the following nimbers
21.9
10.9
i am using 2 squirts alternating
Top
rs2000
Helpful Squirter
Posts: 61
Joined: Mon Mar 07, 2005 8:32 pm
Location: Perth, Australia

Post by rs2000 »

How are your injectors wired up? As in which injectors are on bank one and which are on bank 2?
Top
fiat132
MegaSquirt Newbie
Posts: 28
Joined: Tue Sep 20, 2005 12:22 pm
Location: EGYPT

Post by fiat132 »

its a 4 cylinder engine
Top
Post Reply

Return to “Tuning Fuel and Air”