Can someone help me here, the Microsquirt says it only has logic level coil drivers.
Does this mean it needs inductive coils?
If so it can fire 1GN 1 and 1GN 1A
Will these coils survive a 2 stroke at 7500rpm?
Microsquirt & ign coils on 2 stroke
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Powerabout
- MegaSquirt Newbie
- Posts: 3
- Joined: Fri Oct 31, 2014 9:13 am
Re: Microsquirt & ign coils on 2 stroke
It means it lacks the heavy-duty transistors to handle the 5-10A charging current needed to fire an induction coil. The IGN-1A has the necessary ignitor built-in, and from the specs given (3ms nominal dwell with a max 40% DC) should be good to 8000rpm on a two-stroke.
-
Powerabout
- MegaSquirt Newbie
- Posts: 3
- Joined: Fri Oct 31, 2014 9:13 am
Re: Microsquirt & ign coils on 2 stroke
Many thanks