Kinsler Dual Hall Sensors

Forum for discussing how to install MicroSquirt(TM), choose and troubleshoot sensors, wiring, and communications for MicroSquirt (TM) and MicroSquirt Module(TM).
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Fastship
MegaSquirt Newbie
Posts: 7
Joined: Wed Nov 23, 2011 6:27 am

Kinsler Dual Hall Sensors

Post by Fastship »

Might be usefull to someone seeking crank speed and cam position in one sensor.

I think the wheel could do with more teeth perhaps?

#10630 dual hall sensor & '10600 KINSLER'S SPEED/SYNC TRIGGER WHEELS

Detects the air gap in the rotating
speed/sync wheel to supply triggering
data to the ECU for reference of
engine RPM and cam timing.

http://www.google.co.uk/url?sa=t&rct=j& ... mw&cad=rja
Top
Post Reply

Return to “Installation, Wiring and Sensors”