Many have asked for my turbo ACVW maps, so here they are. :)

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply

So ...

Thanks!
3
100%
You suck!
0
No votes
 
Total votes: 3
Minami Kotaro
Helpful Squirter
Posts: 42
Joined: Sun Sep 12, 2004 3:41 pm
Location: Somewhere in TN

Many have asked for my turbo ACVW maps, so here they are. :)

Post by Minami Kotaro »

These maps work well on a

1915cc ACVW
13psi boost
32 lb/hr injectors

The huge jump to 140 on the ve table at 85/100 map at low rpm is to get me over a stumble related to my too-huge TB.

My timing is very conservative under boost because I don't want to blow it up. Play with it carefully. :)

With these maps, my Bug drives well, pulls 20mph in high gear, and has massive torque under boost.

EDIT: Uploaded a valid spark map. Sorry.
1967 VW Beetle
1915cc turbo ... only 3lbs so far
Controlled by MegaSquirt and EDIS
v2.2 board, MSNS-e 024s11
Check out my ongoing success story.
Top
Post Reply

Return to “Tuning Fuel and Air”