What have I Freakin' DONE!

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
ptegler
Helpful Squirter
Posts: 40
Joined: Tue Nov 09, 2004 8:32 pm
Location: Severn, MD
Contact:

What have I Freakin' DONE!

Post by ptegler »

This is MS1 MSnS-E 29q2 with mt225 on a v3 board
crank fired wasted spark 2 liter straight 6 cylinder engine in a Triumph Spitfire.

attached is my msq.... as well as a data log. The log is simply stating the car 3-4 times. Below 2krpms...it feels like the engine wants to climb out of the car and run away! But at around 2 krpm...it's silky smooth. Now GETTINTG it to 2 krpm is the real trick!

Some PLEASE take a look and tell me what the heck is going on here!
on a
ptegler
ptegler @ cablespeed.com
My Success story: http://www.msefi.com/viewtopic.php?t=21806
Home site: http://www.teglerizer.com/Injected_Spit6.htm
Post Reply