MicroSquirt.com read only forum (Jan.15,2018)

MSII, v3 w/ 2.35 code.

Is it normal for an engine at an idle of 800-1000, to show a map reading of 70 kpa?

I am new to this, so I am not sure what to expect, it seems the map is high at idle, and as I gradually accel it drops to 40 kpa, then slowly back up a bit. I have not tried WOT yet, until I get the ve table done. Cam is .488/5.11 234/244, with 30lb, on SBC 355 SLP TPI setup.

Have only driven and logged once, I want to make sure I am ok to continue tuning.

Many thanks,

Mine`s at 65kpa, that`s down to the cams.

I've got a fairly healthy cam in mine and it reads 56-60 kpa.

Thanks for the info guys.

Mine idles at 72KPA. Seems to work OK, but I'm still tuning.

my stock bmw ilese at 50kpa (cold) and just over 40 kpa when hot. but values like 70kpa are within normal range for aggresive cam, especially if you have ITB's.