Im planning a MS-II on my z32 TT. I believe going with the ford edis is the easiest to use due to the fact you dont have to mess with dwell control and its just so damn simple. anyone have it on thiers that can give me some pointers, morely where to put the 36-1 tooth plate on the crank pully. im assuming the missing tool goes right at the 0 degrees TDC mark?
thanks
thomas
Anyone with MS on their vg30dett 300zx?
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Anyone with MS on their vg30dett 300zx?
RB's r tha shiznit