First the particulars, MS2 on a V3 board and using megatune 2.25v717 with 2.33 code. Also have a LC-1 wideband currently setup for narrow so as to be able to swap in the stock Digi to get to work.
I have gotten my car to start up once for several minutes. I then had a complete failure of my windows system and lost the original settings. I tryed to reconstruct them to the best of my memory. But now cannot for the life of me get it to start. I am starting to get to my wits end. I would appeciate any help I can get.
I am using all of the stock sensors, and idle control systems.
I am including my MSQ. If anyone with a VW has a good MSQ for a MS2 v3 system please drop me a note, so I can parhaps figure out what I am doing wrong.
New install on VW corrado not working
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.