Where to physically locate capacitors for d585 coils?
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
thebutterson
- MegaSquirt Newbie
- Posts: 2
- Joined: Wed Nov 27, 2013 3:12 pm
Where to physically locate capacitors for d585 coils?
I've read the write up for using capacitors with the LS1 and LS2 ignition coils but haven't been able to find any data on where people are actually locating them with their microsquirt setup. I was thinking of just getting a little project board from radioshack along with a case but was wondering if there are other solutions that may be a bit more tidy.
-
thebutterson
- MegaSquirt Newbie
- Posts: 2
- Joined: Wed Nov 27, 2013 3:12 pm
Re: Where to physically locate capacitors for d585 coils?
Just wanted to clarify I'm using microsquirt v3
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: Where to physically locate capacitors for d585 coils?
I'm not using any myself (although not using a MicroSquirt). However, anywhere on the coil power feed wire can work.
Matt Cramer at DIY Autotune
