Ok when you start a new project in tunerstudio it tells you to not open with out loading a tune never start from scratch ??? how do they expect you to start ??? im lost i need a basemap for my 81 yamaha xj650 turbo i have it working with the bike i somehow made a map for it cuz i cant get the tps cailbrated and working i also had rpm the other night and as soon as i set it up for me 36-1 trigger setup now i dont have rpm im so lost at this point thanks to anyone that can help.
heres the parts im using if anyone would be kinda enough to make me a map to start from
03 gsxr 600 throttle bodies with 240cc injectors
3 bar gm map sensor
gm coolent temp
gm IAT
36-1 trigger wheel with the stock vr sensor
EDIS coils
Need some help understanding somthing
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
isaacson06
- MegaSquirt Newbie
- Posts: 33
- Joined: Thu Nov 24, 2011 7:28 pm
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: Need some help understanding somthing
Start with the default tune that loads with the firmware. The real danger is if you open the tuning software and do not either load a tune or grab one from an ECU - it will default to a file full of zeroes.
Matt Cramer at DIY Autotune
