When I run the machine I randomly get the blue screen of death. I'm running Windows 7, 1.66ghz processor and 1 Mb RAM. Any thoughts?
Also in Ve analyze live I can only see 2 filters without the option of scrolling. And I can only see half of those two filter tabs. for min and max rpm. I've briefly tried to alter the computer visuals without luck.
display problems + blue screen of death.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
classic-indy
- Helpful Squirter
- Posts: 60
- Joined: Sun Jan 02, 2011 2:49 pm
-
LT401Vette
- Helpful Squirter
- Posts: 75
- Joined: Sat Jul 16, 2005 7:07 am
- Location: Charlotte, NC
- Contact:
Re: display problems + blue screen of death.
There is only 1 known cause of the BSOD for TunerStudio.
USB to serial cables based on the Prolific chipset. Prolific had a nasty bug in their driver for quite a long time, that i believe they have finally fixed. There is more in the faq on my site about how to fix it.
I still always recommend FTDI based cables.
http://www.efianalytics.com/TunerStudio/faq.html
You should be able to see everything on as little as 600 pixels high, but you need to mind what look & feel you are using and will likely need to hide the live graph at the bottom.
The newer betas have quick hide options for the graph.
USB to serial cables based on the Prolific chipset. Prolific had a nasty bug in their driver for quite a long time, that i believe they have finally fixed. There is more in the faq on my site about how to fix it.
I still always recommend FTDI based cables.
http://www.efianalytics.com/TunerStudio/faq.html
What resolution are you running?And I can only see half of those two filter tabs. for min and max rpm. I've briefly tried to alter the computer visuals without luck.
You should be able to see everything on as little as 600 pixels high, but you need to mind what look & feel you are using and will likely need to hide the live graph at the bottom.
The newer betas have quick hide options for the graph.
-
classic-indy
- Helpful Squirter
- Posts: 60
- Joined: Sun Jan 02, 2011 2:49 pm
Re: display problems + blue screen of death.
resolution is 1024x600. I believe I'm using a prolific usb to serial cable, but I'm not at home because of work for the next few days. I will start reading for usb to serial solutions.