Microsquirt and megaview

Richard0327 · Post by **Richard0327** » Tue Feb 15, 2011 6:12 pm

Simple question. Will megaview and microsquirt work together and if so how??? I have hooked them up and nothing. Thanks

Matt Cramer · Post by **Matt Cramer** » Wed Feb 16, 2011 5:38 am

They should. What code is the MicroSquirt running? Any chance the MegaView has a processor set up for MS1?

Richard0327 · Post by **Richard0327** » Wed Feb 16, 2011 3:37 pm

Yaaaa that would make sence. To start, the bod rate would be wrong. I will see if I can find update for mega view. Thanks

Richard0327 · Post by **Richard0327** » Wed Feb 16, 2011 8:29 pm

OK I have had the megaview since 05 and it works great with an old megasquirt I still have. One with an 8x8 map. No ignition, auto tune and a nbo2. Microsquirt is running the newest V. No mater what I do it will not turn on the MV. Nothing. I have power and confirmed Rx Tx and G and that the MiS is running. What ya think Thanks

Matt Cramer · Post by **Matt Cramer** » Fri Feb 18, 2011 5:23 am

If the processor works with MS1, it won't work with MS2. You will have to change the embedded code on the processor (or change out the processor for one with the right code for the MS2's serial commands).

MicroSquirt.com read only forum (Jan.15,2018)

Microsquirt and megaview

Microsquirt and megaview

Re: Microsquirt and megaview

Re: Microsquirt and megaview

Re: Microsquirt and megaview

Re: Microsquirt and megaview