Wiring Harness

[Nitrobanshee]

I need some pictures of how everybody is hooking there Wires to the microsquirt module. I bought the wire connectors from DIYautotune but do not have a clue as to what to do with it, other than a computer ribbon cable. Im shure that some people hook wires strait to the board but the pins are so close together that Im not shure how to keep them from touching together.

Thanks Jeremy

[Tim Taylor]

I am installing a 50 pin header connector and then will have the mating connector on a fabricated PC board that will have a connector on that board. What are you hooking the unit to.