no communication
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
supertuner
- Helpful Squirter
- Posts: 43
- Joined: Wed Apr 29, 2009 3:54 pm
no communication
Ok Iam now on my 3rd ms. This one is still working/ running, but will not communicate with megatune. I read somewhere before that somebody elses did this and it was the comunication chip in the ms. Can this be repaired, and who could repair it. Thanks
-
Bruce Bowling
- Site Admin
- Posts: 285
- Joined: Mon Feb 16, 2004 4:25 pm
- Location: Baltimore, MD
Re: no communication
Email me offlist for assistance - bbowling@earthlink.net
-
Bernard Fife
- Super Squirter
- Posts: 1009
- Joined: Mon Feb 16, 2004 3:15 pm
Re: no communication
st,
In addition to contacting Bruce, you might check out the communications troubleshooting tips here:
http://www.megamanual.com/connect.htm#ms2
These are for MS-II, but most of the MT set-up and other tips apply to MicroSquirt.
Lance.
In addition to contacting Bruce, you might check out the communications troubleshooting tips here:
http://www.megamanual.com/connect.htm#ms2
These are for MS-II, but most of the MT set-up and other tips apply to MicroSquirt.
Lance.