Capacitor for Logic Level Conversion
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
obxer
- MegaSquirt Newbie
- Posts: 27
- Joined: Fri Aug 03, 2007 8:13 am
- Location: Nags Head, NC USA
- Contact:
Capacitor for Logic Level Conversion
Due to resets and tach issues, I want to convert my version 1 Microsquirt to use logic level ignition output (http://www.microsquirt.info/us_logic_level_spark.htm) . Can someone give me more info on the .001 uF capacitors that are recommended for doing this? What type and what voltage rating should I use? There's too many choices for me on the Digi Key site! Thanks!
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: Capacitor for Logic Level Conversion
I don't see any problem with using 50 volt ceramic capacitors.
Matt Cramer at DIY Autotune
