also wanted to ask was, the PWM current is at 100%
and the PWM time threshold is 25.5,
im running low impence imjectors with 10r ohm resistors on each which gives a total resistance of 12.2 ohms, which gives me
a running current of about 1.0 amp.
so what will i need to change the PWM current & PWM time threshold to ?
anyone please advize.
thankyou
couple of questions
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.