MicroSquirt temp rating
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
MicroSquirt temp rating
Are all the componants in the MicroSquirt going to be automotive rated so that it can be installed underhood?
-
Bruce Bowling
- Site Admin
- Posts: 285
- Joined: Mon Feb 16, 2004 4:25 pm
- Location: Baltimore, MD
Re: MicroSquirt temp rating
Yes, the components selected are automotive temp. And from testing the highest temperature of any component is about 6 degrees above ambient, including power regulator and injector drivers. Even the VB921s, with the proper dwell setting, only run about 5 degress above ambient.Deaninkc wrote:Are all the componants in the MicroSquirt going to be automotive rated so that it can be installed underhood?
- Bruce