MSv2.2/MS-IIv2, MT2.25b695, Monitor_v2.36.abs.s19 file, Olds 215 V8 with blower. When I crank to start I get a 2 ms injector pulse width for 7 seconds, then pw jumps to 6ms and the engine starts and everything appears to work normally.
Priming pulse: 3.0
PW @ -40*: 24.0
PW @ 170*: 6.0
ASE: 30% for 250 cycles
Any ideas on why this happens? (I'll run a datalog)
Thx
2ms pulse for 7 seconds when starting
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Jim Blackwood
- MegaSquirt Newbie
- Posts: 28
- Joined: Thu Jul 29, 2004 5:31 pm
- Location: Gunpowder Rd