turn off prime pulse

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
ElvisC
MegaSquirt Newbie
Posts: 1
Joined: Thu Dec 01, 2005 4:18 pm

turn off prime pulse

Post by ElvisC »

Hey,

Im currently using my ms as an EIC, and would like to turn off the prime pulse because everytime i go to crank it I have to flood clear it :( which is a pain and would like to not have to deal with that anymore :D

thanks!!


also btw im using ms1v3 with msns_e installed
3===D.. lol
Top
Jedrik
Helpful Squirter
Posts: 78
Joined: Thu Oct 21, 2004 9:07 am
Location: Seattle WA
Contact:
Contact Jedrik

Post by Jedrik »

I haven't used msns_e in a while but is there any reason you can not set the prime pulse to zero?
Top
newtyres1
Helpful Squirter
Posts: 139
Joined: Mon Feb 06, 2006 7:32 pm
Location: Brisbane, Australia

Post by newtyres1 »

Set the prime pulse to 0.1 mS, I don't think the code likes a zero prime pulse (think I read that in the Megamanual).
Top
shaodome
MegaSquirt Newbie
Posts: 20
Joined: Thu Aug 26, 2004 12:58 pm

Post by shaodome »

0 works fine for me in all versions from 21u and up.

Also, change the "prime pump" to when RPM>0. That will kill the prime pulse.
Top
Post Reply

Return to “Tuning Fuel and Air”