http://www.radioshack.com/sm-8-ohm-non- ... 62288.html
Other than being real ugly, any forseeable issue with these? I want to disable pwm with my 2ohm injectors.
8ohm 20w resistors from radio shack
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
boost junkie
- Helpful Squirter
- Posts: 62
- Joined: Tue May 11, 2004 7:58 am
- Location: dallas texas usa
Shawn,
How many injectors are you running? Many oems used resistor packs with multiple resistors in a single die-cast aluminum housing. Snip one off a mid-90's Honda, and you get a four resistors with a nice sealed connector as well.
Roger.
How many injectors are you running? Many oems used resistor packs with multiple resistors in a single die-cast aluminum housing. Snip one off a mid-90's Honda, and you get a four resistors with a nice sealed connector as well.
Roger.
1979 Mazda RX-7, running MSnSExtra029L for fuel and spark control on a turbocharged, intercooled, and
(of course!) injected 13B rotary.
(of course!) injected 13B rotary.