Cannot get it started! please help

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
flyguyeddy
MegaSquirt Newbie
Posts: 34
Joined: Thu Sep 16, 2004 11:25 am

Cannot get it started! please help

Post by flyguyeddy »

ok, the car is a 96 cavalier with a 2.4 liter twincam engine. we are currently controlling spark as well as fuel. i cannot get it to start for the life of me. i have included an .msq file for someone to look over. i turned off the afterstart enrichment cause i was told it has to be spot on for it to work right. this car seems to be runnig very rich. the plugs were sooty and fuel-soaked. I urned off the extra fuel with a lighter and wiped it clean, but have not attempted to start it yet. can someone please look this over and tell me if im doing anything wrong? thanks!
Post Reply