I've just started to learn to set up and initial tune of my MSII on V3 board and I've some questions on the ignition settings. I'm running a stock dizzy (which I've locked) with a built in vr sensor. Sensor and lobe align at about 80deg BTDC and spark tower align at about 20deg BTDC. MS will take care of ignition duties and firing a single coil. Could you please have a look at the ignition settings page that I have and let me know if I got it right, thanx.
tkm
ignition settings
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Bernard Fife
- Super Squirter
- Posts: 1009
- Joined: Mon Feb 16, 2004 3:15 pm
metcap,
That looks right to me. There's more on the direct coil control here: http://www.megasquirt.info/ms2/vb921.htm and a little bit on the VR sensor here: http://www.megasquirt.info/ms2/vradjust.htm
Lance.
That looks right to me. There's more on the direct coil control here: http://www.megasquirt.info/ms2/vb921.htm and a little bit on the VR sensor here: http://www.megasquirt.info/ms2/vradjust.htm
Lance.