MicroSquirt.com read only forum (Jan.15,2018)

Hi Monkey,

Thanks for the information the readings you have sent are very helpful, going to grab the Druck from work the weekend to Cal the sensor.

If anyone reading this has tables for VE, AFR & spark advance that they could send me or point me in the right direction to find them I would be ...

Hi Matt,

Thanks for a reply.

The Map sensor is a GM unit off a N/A car 2.0l couldn't cross referance the GM part number 2503679 from the manuals with a UK car or parts suppliers, but with some cross referencing we came up with part No: MS002, (going to double check this again now).

The map sensor ...

Having spent the weekend installing MicroSquirt & GSX-R TB's (40mm) on my friends Pinto 2l engine 146bhp@6500 133ft/lb@4300rpm got the engine started ok but running very rich 10.9 on the wideband. Not 100% on the MAP sensor readings that I am getting (GM Sensor) reading 5volts full scale (260kpa ...

Hi Matt,

Many thanks for the reply and info.

If I set the internal jumpers JP5 & JP6 to ignition logic level output will the 1K resistor still be required?

The only reason that we are currently looking at a EDIS install is due to the concerns of electrical noise on the system using the ignition ...

Hi! Can anyone help.....

I have been asked by a friend to install a MicroSquirt system with a EDIS 4.

The problem that I have is the wiring diagrams and setup for EDIS all seem to be for the MegaSquirt.

What do I need to configure on the MicroSquirt in order to run a EDIS set up and which ...