MicroSquirt.com read only forum (Jan.15,2018)

Hi again. so it was suggested that i try the injector test mode to see if the injectors were working. we did this and were successful. however now the problem stands that I can get out of test mode. now when we power the bike the injectors believe that they are still in test mode.

I've tried resetting it and fetching it from the ECU and resetting it i've even tried quitting the program without saving but with NO success. How do i get it back to NO TEST MODE......

Sounds like you're running an older version of the firmware. There was an issue with injector test mode not resetting, and that was fixed around 2.884j or so. What version are you on?

i believe we're running 2.88 does that mean i'm screwed>>>

Yes, you are. Reloading the code will get it out of injector test mode though.