Page 1 of 1
trigger wheel
Posted: Mon Nov 14, 2016 10:47 pm
by IceCold4x4
Would this work as a trigger wheel for fuel and ignition or just for fuel?
Re: trigger wheel
Posted: Tue Nov 15, 2016 6:51 am
by Matt Cramer
Currently, MicroSquirt is not able to use the long tooth for cylinder identification.
Re: trigger wheel
Posted: Tue Nov 22, 2016 6:08 pm
by dontz125
If you have a Hall sensor, you could use the leading edges for a 'Basic Trigger' arrangement. There is an experimental patch for the MS2/Extra code that needs an adaptor circuit that allows that pattern to be used with a VR sensor, but otherwise that wheel cannot be used with a VR sensor or for ignition.