pin 25 and 26 power?
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
pin 25 and 26 power?
I am using a NTC thermistor 10kohm I bought from digikey. Do I have to be worried about overloading the thermistor? It has a max power rating and I cannot find any specifications on pin 25 and pin 26 for my Microsquirt.
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: pin 25 and 26 power?
They are connected to VREF through a 2.49K resistor. See the hardware diagram here:
http://www.microsquirt.info/us_hardware.htm
http://www.microsquirt.info/us_hardware.htm
Matt Cramer at DIY Autotune
