Page 1 of 1
no communication
Posted: Sat Aug 01, 2009 9:33 pm
by supertuner
Ok Iam now on my 3rd ms. This one is still working/ running, but will not communicate with megatune. I read somewhere before that somebody elses did this and it was the comunication chip in the ms. Can this be repaired, and who could repair it. Thanks
Re: no communication
Posted: Sun Aug 02, 2009 2:18 pm
by Bruce Bowling
Email me offlist for assistance -
bbowling@earthlink.net
Re: no communication
Posted: Sun Aug 02, 2009 4:21 pm
by Bernard Fife
st,
In addition to contacting Bruce, you might check out the communications troubleshooting tips here:
http://www.megamanual.com/connect.htm#ms2
These are for MS-II, but most of the MT set-up and other tips apply to MicroSquirt.
Lance.