lc1 with anolog gauge
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
supertuner
- Helpful Squirter
- Posts: 43
- Joined: Wed Apr 29, 2009 3:54 pm
lc1 with anolog gauge
I have a lc1 with a westach anolog gauge, the gauge reads from 8-18 afr. I am running alchohal wich has an afr of 6.4 but the gauge dosn't go down that low. Does anybody make a gauge that low, or is there a way to cheat to get an acurate reading?
-
gboezio
- Helpful Squirter
- Posts: 64
- Joined: Mon Dec 04, 2006 9:15 am
- Location: Victoriaville, QC, Canada
Re: lc1 with anolog gauge
In fact it reads the lambda factor, aka oxygen content, someone correct me if I'm wrong, but it should read 14.7 when you attain the stoic combustion of your alchool at 6.4 (lambda=1)
It's just sold for the mainstream gas engines
It's just sold for the mainstream gas engines
Turbo Honda VTR1000F on the way
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: lc1 with anolog gauge
You could take the glass off the gauge (pretty tricky but possible) and stick new numbers on the scale.
The XD-16 can read AFRs for other fuels without mods.
The XD-16 can read AFRs for other fuels without mods.
Matt Cramer at DIY Autotune
