Hi all,
one big question:
Can i read any data from the Can-Bus on Microsquirt?
data like air and engine temerature, RPM, and so on...?
regards mario
CAN-Bus
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Bernard Fife
- Super Squirter
- Posts: 1009
- Joined: Mon Feb 16, 2004 3:15 pm
Re: CAN-Bus
Mario,
Another processor can do this. It has to be CAN enabled, and it has to use the appropriate protocol and memory locations (http://www.megamanual.com/com/CAN.htm). See the MegaShift source code for an example: http://www.msgpio.com/manuals/mshift/4L60E_main.c
Lance.
Another processor can do this. It has to be CAN enabled, and it has to use the appropriate protocol and memory locations (http://www.megamanual.com/com/CAN.htm). See the MegaShift source code for an example: http://www.msgpio.com/manuals/mshift/4L60E_main.c
Lance.