Page 1 of 1
TPS count
Posted: Mon May 12, 2008 4:04 am
by pommie02
what should my tps lower count be ?
is there a point where microsquirt works or is there a lower working level
Other than wanting > 3.5V at WOT...
Posted: Mon May 12, 2008 5:22 am
by SQLGUY
and quite a bit lower at idle, I don't know that there is a "should be" range.
Mine is 241 closed and 952 wide open.
Re: TPS count
Posted: Mon May 12, 2008 1:12 pm
by pommie02
I am sure i saw a comment that the lower count needed to be below 150 and idealy 20..
but that may have been on an a megasquirt 1...
Re: TPS count
Posted: Tue May 13, 2008 7:41 am
by Matt Cramer
pommie02 wrote:I am sure i saw a comment that the lower count needed to be below 150 and idealy 20..
but that may have been on an a megasquirt 1...
Sounds like it was. The MS-I and MS-II / Microsquirt use very different ranges.