MicroSquirt.com read only forum (Jan.15,2018)

I would like to use a Megasquirt on a Ducati 999 90deg. v-twin with one VR sensor reading off of half time cam drive gear (48 teeth total with a two tooth gap) it looks like the M-N toothed wheel option is closest to what I need, but due to the pick up sensing at half crank speed I don't think I will be able to configure the timing to work properly. Also this motor has coil on plug ign. and it says the M-N toothed wheel option must use a single coil.

Any help or sugestions would be most welcome

I'm pretty sure the Microsquirt will fire 2 coils from a toothed wheel as it has 2 spark outputs. Well it did the last time I bench tested it 2 or 3 months ago. Grippo wrote some code for a missing tooth cam wheel, that option should show up in Megatune.

Ian.

This works with the newest code. You'd set it to Single Cam Wheel Input.