Page 1 of 1
Is this what good LoZ injector PWM should look like?
Posted: Tue Sep 12, 2006 12:13 am
by Philip Lochner
I implemented PWM with my low impedance injectors after Turbo4V found a solution to the PWM issues.
Attached (not so good) pics of the injector pulses.
The first pic is of the entire pulse which shows the initial permanent on and then, where the "double lines start, the PWM area followed by the final switch off.
The flyback spikes during PWM are not visible on this pic, so I took another pic after having "zoomed in" on the PWM area only.
So far, I'm not having any issues, just would like to know if this appears normal?
Is this what good LoZ injector PWM should look like?
Posted: Tue Sep 12, 2006 12:13 am
by Philip Lochner
I implemented PWM with my low impedance injectors after Turbo4V found a solution to the PWM issues. Attached (not so good) pics of the injector pulses. The first pic is of the entire pulse which shows the initial permanent on and then, where the "double lines start, the PWM area followed by the final switch off. The flyback spikes during PWM are not visible on this pic, so I took another pic after having "zoomed in" on the PWM area only. So far, I'm not having any issues, just would like to know if this appears normal?
Kind regards Philip Land Rover Discovery MS-2/V3/2.36/LC-1/4.6 V8i, VR(6 BTDC), TP100, std coil - EDIS install in progress, 36-1 mounted Jaguar XJS V.12 5.3, MS-2(2.686t11)/Dual LC-1/MSD6A/spark(VR/dissy)+fuel(LoZ+PWM)
Attachments:This is just the PWM area of the injector pulseThe entire injector pulse
Posted by email.
Posted: Mon Feb 05, 2007 11:50 am
by MegaScott
Phil,
The pics didn't come through, you will need to either post off line links or use the attachment feature of the forum.
Cheers!
Scott
Posted: Tue Feb 06, 2007 12:38 am
by Philip Lochner
MegaScott wrote:Phil,
The pics didn't come through, you will need to either post off line links or use the attachment feature of the forum.
Cheers!
Scott
Hi Scott
The pics were there when I posted. I think the thread has been moved but the pics got lost. I don't understand why its been moved to the MICROSquirt site as it belongs under MS-2 general IMHO. Will have to go look for the pics on my home PC.