Page 1 of 1
latest software
Posted: Sun Jul 09, 2006 11:29 am
by Alatus
I'm new to megasquirt and want to run a knock sensor in my newly-finished MSIIPCBV3. Does anybody know where to get v2.6 firmware?
Posted: Sun Jul 09, 2006 3:22 pm
by IanS
If you got to the beta forums and the sticky at the top, there is a link to the newest, 2.684. Assuming you don't need the wheel decoder functionality, it appears to be working pretty well.
Posted: Mon Jul 10, 2006 1:33 am
by FiatFreak
I would run the 2.36 software until something newer is officially released, especially if this the first time MS will be used on the car. Get it running smoothly on that, and then go to the beta code. Keep in mind that MSII will not accept the raw signal straight from the knock sensor. The knock sensor has to be connected to seperate box that then puts out a 0 to 5 volt signal to MSII.
Posted: Mon Jul 10, 2006 2:07 pm
by Alatus
Thanks much, and I do have the proper GM signal massager.