MicroSquirt.com read only forum (Jan.15,2018)

I have done the quick little VE table base line but I am not sure what all else it will take to get it up and running for a base line. Here is what I have:

87' Toyota Supra Turbo
3000cc I6
Dynoed at:
420rwhp at 5700RPM
420ft/lbs at 4900rpm
550cc Injectors, 255lph fuel pump, and FPR
T70 Turbo
Ignition setup will be EDIS 6 with stock coils(waste spark system)

Let me know what other information you would need. Once I have a base line I will be able to tune from there!

Thanks,
Seth

You really need to do this step yourself by reading the manual and understanding what the settings mean. There is a learning curve for sure but once you understand those settings you will be far better placed to start tuning.

James