Just having a little fun.
I tried to get a good range of conditions.
Currently using MegaTunix.
I used a PLX-M300 wideband and have to tune with voltage (unless someone could tell me another way). Stoichiometric is 2.3v, 18:1 is about 3.75 and 10:5 is about 1v.
Never tuned anything before, just tried to get the AFR where its supposed to be. Runs sweet as far as I can tell.
Excel file-
http://homepage.mac.com/gavinwilliams/2 ... atalog.xls
MTX output-
http://homepage.mac.com/gavinwilliams/Datalog2
And my settings-
http://homepage.mac.com/gavinwilliams/280z
How does this look?- Datalog
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Gavin Williams
- MegaSquirt Newbie
- Posts: 3
- Joined: Wed Feb 23, 2005 10:29 am
- Location: Boston, MA
How does this look?- Datalog
Last edited by Gavin Williams on Fri Apr 07, 2006 11:56 am, edited 3 times in total.
-
Gavin Williams
- MegaSquirt Newbie
- Posts: 3
- Joined: Wed Feb 23, 2005 10:29 am
- Location: Boston, MA
