MicroSquirt.com read only forum (Jan.15,2018)

*****I Fixed It****---disregard this post please

Bud,

The extra baro MAP sensor and WB don't come into it, all versions of the MS-II code/ini files will handle these. However, you do need to know which code you have loaded to the MegaSquirt-II, and select a INI file with the same number.

For example, if you have loaded the 2.34 code from here: http://www.megasquirt.info/ms2/code.htm

Then you need to 'activate' the 'megasquirt-II.ini.2.3' file.

Norte that the last number in the code version doesn't count for the INI file. All embedded code files (.S19) of the form 'Monitor_v2.3x.abs.s19' use the 'megasquirt-II.ini.2.3' file in MegaTune.

Lance.

Thanx! (as always }