MicroSquirt.com read only forum (Jan.15,2018)

I've just started to learn to set up and initial tune of my MSII on V3 board and I've some questions on the ignition settings. I'm running a stock dizzy (which I've locked) with a built in vr sensor. Sensor and lobe align at about 80deg BTDC and spark tower align at about 20deg BTDC. MS will take care of ignition duties and firing a single coil. Could you please have a look at the ignition settings page that I have and let me know if I got it right, thanx.

tkm

metcap,

That looks right to me. There's more on the direct coil control here: http://www.megasquirt.info/ms2/vb921.htm and a little bit on the VR sensor here: http://www.megasquirt.info/ms2/vradjust.htm

Lance.