MicroSquirt.com read only forum (Jan.15,2018)

I assumed it looks good but after looking it over several times starting to look abit fuzzy but i could be wrong. Its abit big but did like a 20min datalog. This been tested to see y i have just a idle problem plus i can never get it over 5500rpm at the time now i got 6100rpm but not enough what im looking for. Let me know

Thanks

Jeff

btw, its the 2.2 v

Jeff,

You need to calibrate your TPS ('Tools/Calibrate TPS'), something odd happens to it in the middle of your log.

However, what are the symptoms of the problem? Other than the idle being a bit fast, and rolling a bit, it's hard to see any particular problem in the datalog.

Lance.

lance wrote:Jeff,

You need to calibrate your TPS ('Tools/Calibrate TPS'), something odd happens to it in the middle of your log.

However, what are the symptoms of the problem? Other than the idle being a bit fast, and rolling a bit, it's hard to see any particular problem in the datalog.

Lance.

The idle been done to me if i don't have the idle high enough it will kill. but now i have it back to normal and it will kill but sometimes i can get it to stay idling plus i can't seem to get the car to go pass 6100rpm i have HD valve springs but its a stock cam. Before i did major modding it with the car all being stock, I could get it up to 8k no problem. But mid range its excellent. Just sick of having to sit there starting it after about 10times til it'll start also it would kick back sometimes. I know everything mech. on the motor is correct. I calibrated the TPS many times when i was adjusting the throttle plate but must of forgot when it did this datalog. Thanks for checking it out. Maybe someone would figure out the two problems i have

Jeff