MicroSquirt.com read only forum (Jan.15,2018)

Hi,

I just bought a V3.0 MS II board and want to run 2 feuls. Reading trough the threats here I understand I need to switch tables and switch power for the injectorbanks.

OR

Use a NOS setting, set table 3 to zero and connect the LPG injectors to bank 2.

BUT:

Can MS 3.0 II do this ?
Do I need extra hardware ?

JeroenBosma,

You have to tell us which processor you have, MS-I or MS-II. If you aren't sure, there's pictures and descriptions in the FAQ: http://www.megasquirt.info/

This will determine which code you have, and how you might go about using dual fuels.

Lance.

I use the MS II...