Getting to much fuel

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
v8ranger
MegaSquirt Newbie
Posts: 6
Joined: Thu Jul 29, 2004 2:14 pm
Location: Clinton,IA

Getting to much fuel

Post by v8ranger »

When I stab my thottle black smoke comes out and the engine stumbles then when u hold it open it will rev up ,when it clears out.Am I getting to much gas in my enrichment bins.It idles fine.My coolent sensor doesn't seem to work either.
Top
Enthalpy
Helpful Squirter
Posts: 44
Joined: Thu Jul 29, 2004 12:04 pm
Location: Denver, CO
Contact:
Contact Enthalpy

Post by Enthalpy »

Make sure your base fuel map is tuned in steady-state before messing with enrichment. If it is, then reduce the acceleration bins. Then, get another coolant temp sensor.
-Damon

http://www.damon.menocu.com/MR2/
1991 MR2, 60K miles, 90K coats of wax. ;)
Top
Post Reply

Return to “Tuning Fuel and Air”