Holley 85# injectors

For discussing injector selection, manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
billjh
MegaSquirt Newbie
Posts: 2
Joined: Wed Nov 23, 2005 9:17 am
Location: Golden CO

Holley 85# injectors

Post by billjh »

I just found the topic for the Holley injectors. Mine appear to work fine without the flyback board. Should I use one anyway? Thanks
Top
Bernard Fife
Super Squirter
Posts: 1009
Joined: Mon Feb 16, 2004 3:15 pm

Post by Bernard Fife »

billjh,

2 85lb/hr Holley injectors *might* be okay. 4 will likely eventually fail without the flyback board. When they fail, you will be stuck, unless you have a back-up MegaSquirt reeady to go. So I would install the flyback board, if this were mine.

Lance.
Top
billjh
MegaSquirt Newbie
Posts: 2
Joined: Wed Nov 23, 2005 9:17 am
Location: Golden CO

Thanks Lance

Post by billjh »

I have the flyback on order. This is for a CJ5 and it gets to places you don't want to walk out of!
Top
Post Reply

Return to “Injectors, Fuel & Air Supply”