Hi.
Has anyone used the 0 280 140 524 IAC or some IAC related to this (like the 0 280 140 505)?
It's a 3 wire and I'm going to use it as described on http://megasquirt.sourceforge.net/extra/pwmidle.html, but my question is: "Has anyone used the setup for the Bosch IAC? Is it OK or do I need to make some changes? I'm going to converted my car from MS-V2.2 to MS-V3.0 is the christmas, so I have not yet been able to test the circuit. That's why I would like to hear from someone who has used the circuit.
Thanks in advance and merry x-mas to all
Peter
http://www.volvo300.dk
Denmark
Bosch 0 280 140 524 IAC
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
T3Bunny
- Helpful Squirter
- Posts: 54
- Joined: Sun Nov 28, 2004 7:44 pm
- Location: Rochester, NY
- Contact:
Dig around in the MsnSe forum. They have definatly used the Bosch valve. In fact they even tweaked a code for it IIRC. I have my ECU setup to run this, but its unlikely I will be doing any real tweaking on my car before spring due to the lack of a garage right now.
Forget the porn, my bathroom is full of car manuals...
She runs!
She runs!