PWM current
Posted: Sat Jul 22, 2006 7:43 am
also wanted to ask was, the PWM current is at 100%
and the PWM time threshold is 25.5,
im running low impence imjectors with 10r ohm resistors on each which gives a total resistance of 12.2 ohms, which gives me
a running current of about 1.0 amp.
so what will i need to change the PWM current & PWM time threshold to ?
anyone please advize.
thankyou
and the PWM time threshold is 25.5,
im running low impence imjectors with 10r ohm resistors on each which gives a total resistance of 12.2 ohms, which gives me
a running current of about 1.0 amp.
so what will i need to change the PWM current & PWM time threshold to ?
anyone please advize.
thankyou