here are my maps just for reference. there's hardly any info about tuning sparkmap in the megamanual....
maybe some experts will be able to pinpoint some issues with these...
I made spark map by looking at stock ECU spark map.. it's not exacly the same, but roughly there.... notice low advance at wot at high rpm's...
advanced tuning issue: missing at light loads/coast
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
mops
- Experienced Squirter
- Posts: 217
- Joined: Sun Sep 25, 2005 4:13 pm
- Location: Auckland, NZ
- Contact:
aswell can somebody look at my datalog here and confir, that my mapdot looks allright ? actually looks pretty noisy to me.. but I cant tell whether it is mechanical or electrical noise... jumps durning idle normally +-10, but sometimes like +-15... if my map AE treshold is 20 then it is often falst triggered... best if I set it up that mapdot treshold to 40....
BMW, 1985, E30, 325i, 2-door, 5spd , 127k miles, short shift, MSII, V3/code 2.684/60-2 wheel/MT 2.25, LC-1 wbO2, ignitor module mod driving msd coil/, 3 pin Bosch PWC IAC mod