GEGO is only active when TPS=0....???

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
milesinfront
MegaSquirt Newbie
Posts: 22
Joined: Fri Aug 20, 2004 3:25 pm
Location: Australia
Contact:
Contact milesinfront

GEGO is only active when TPS=0....???

Post by milesinfront »

I've just started datalogging my current project and have discovered that GEGO is ONLY active when TPS=0. I'm sure it's just a setting, but which one???

I have a very healthy looking AFR log, so the O2 sensor side of things appears healthy...

MS-I, V2.2, EDIS
Spotchas!--------->
_______________________________________

-1984 C1 2.3 Alpina (E30) -> MS'd
-1976 Triumph Dolomite Sprint Race Car -> Ms n 'EDIS'd
Top
milesinfront
MegaSquirt Newbie
Posts: 22
Joined: Fri Aug 20, 2004 3:25 pm
Location: Australia
Contact:
Contact milesinfront

Post by milesinfront »

Hang on!

With a TPS of 9 my MAP is 90+, looks like i may have to consider Alpha N... :-(

Sorry for the post...
Spotchas!--------->
_______________________________________

-1984 C1 2.3 Alpina (E30) -> MS'd
-1976 Triumph Dolomite Sprint Race Car -> Ms n 'EDIS'd
Top
Post Reply

Return to “Tuning Fuel and Air”