flow rating magneti marelli monojet system.

For discussing injector selection, manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
snillet
Helpful Squirter
Posts: 48
Joined: Tue Dec 06, 2005 12:43 pm
Location: Sweden / Kungälv

flow rating magneti marelli monojet system.

Post by snillet »

HELLO ! 8)

Is there anyone out there who has any figures of flow rate in the injector of the following system:

Fitted to these cars:
Peugeot 309/405
Citroën BX

Years: around 1989 until 1992

System name:

Magneti Marelli G5S0, throttle body injection, around 90hp which differs a little between different countries.

The engine code is XU5M BDZ2

But it should be the same injector on all BDZ and BDY engines i think.

Anyone ?, otherwise i´ll have to "assume" how big it is annd correct req. fuel after that :shock: , not ideal...

There are NO markings or numbers on the injector...
Peugeot/Citroen XU5 BDZ(4cyl 1.6litre) engine with 60-2 VR wheel decoding singel coil and dizzy spark and Magneti Marelli(solex) TBI. Msns-E hi-res 0.08f and E85(Ethanol) in the gastank.
Top
Post Reply

Return to “Injectors, Fuel & Air Supply”