460cc 2nd gen rx-7 injector constants
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
460cc 2nd gen rx-7 injector constants
Just curious as to what constants you guys out there are running on the low impedence '86-'87 460cc 2nd gen mazda rx-7 injectors.
-
Mike_Robert
Sorta apples and oranges, but I'm running a ported 12A with just 2 of the Maza 680 low Z injectors. They test at 750ml/min so I'm pleasantly surprised. I run them with 5 ohm Ohmite resistors so as to not fool with PWM, etc. I use a .8 ms opening time and have disabled PWM via 25.5ms threshhold. This system works great and the resistors do not get even perceptably warm even after 4+ hours at 80mph cruise/]4100 rpm. 167 RWHP so something's working OK!
-Mikr'
-Mikr'