trigger wheel
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
IceCold4x4
- MegaSquirt Newbie
- Posts: 1
- Joined: Mon Nov 14, 2016 10:46 pm
trigger wheel
Would this work as a trigger wheel for fuel and ignition or just for fuel?
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: trigger wheel
Currently, MicroSquirt is not able to use the long tooth for cylinder identification.
Matt Cramer at DIY Autotune
Re: trigger wheel
If you have a Hall sensor, you could use the leading edges for a 'Basic Trigger' arrangement. There is an experimental patch for the MS2/Extra code that needs an adaptor circuit that allows that pattern to be used with a VR sensor, but otherwise that wheel cannot be used with a VR sensor or for ignition.
